NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 560)

can track which multicast packets to forward to each other and to their directly connected
LANs. You can implement PIM-SSM with a strict subset of the PIM protocol mechanisms.
Both regular IPv6 multicast and SSM can coexist on a single router, and both can be
implemented using the PIM protocol. A range of multicast addresses, FF3x::/32 for IPv6,
is reserved for SSM.
To add an IPv6 PIM-SSM group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > IPv6 PIM > SSM Configuration.
The SSM Configuration page displays.
6. In the SSM Group Address field, enter the source-specific multicast group IPv6
address.
7. In the SSM Group Mask field, enter the source-specific multicast group IPv6 address
prefix.
8. Click the Add button.
Your settings are saved. The group is added.
9. To save the settings to the running configuration, click the Save icon.
Delete an IPv6 PIM-SSM group
You can delete an IPv6 PIM-SSM group that you no longer need.
To delete an IPv6 PIM-SSM group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
Main User Manual 560 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual