beautypg.com

Ipv4 dhcp server, Configure a dhcp server – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 99

background image

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Management > Bonjour > Bonjour Details.

The Bonjour Details page displays.

The Bonjour Administration Mode field displays whether Bonjour is enabled or
disabled.

6. To refresh the page, click the Refresh button.

The following table describes the nonconfigurable fields on the page.

Table 29. Bonjour Published Services

Description

Field

The Bonjour service names in the switch.

Service Name

The Bonjour service type names in the switch.

Type

The Bonjour service domain in the switch.

Domain

The Bonjour service port number.

Port

The Bonjour service text.

TXT Data

IPv4 DHCP server

You can configure settings for an IPv4 DHCP server, DHCP pools, and DHCP bindings.
You can also view DHCP statistics and, if they occur, DHCP conflicts.

Configure a DHCP server

To configure a DHCP server:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

Main User Manual

99

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual