NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 467)

8. To disable policing, clear the Policing check box.
By default, policing is enabled.
9. From the Outbound Priority menu, select the priority for outbound traffic:
• High: The way this setting is applied depends on whether policing is enabled:
• Policing enabled: High sets the action to mark dscp ef.
• Policing disabled: High sets the action to mark ipdscp ef.
• Medium: The way this setting is applied depends on whether policing is enabled:
• Policing enabled: Medium sets the action to mark dscp af31.
• Policing disabled: Medium sets the action to mark ipdscp af31.
• Low: The way this setting is applied depends on whether policing is enabled:
• Policing enabled: Low sets the action to send.
• Policing disabled: Low sets the action to mark ipdscp be.
10. In the Ports table, click each port to which you want to add the DiffServ policy.
11. In the LAG table, click each LAG to which you want to add the DiffServ policy.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
Configure the DiffServ mode and display the entries in the
DiffServ private MIB tables
You can enable or disable DiffServ and display the current and maximum number of
rows in each of the main DiffServ private MIB tables.
To configure the DiffServ mode and display the entries in the DiffServ private MIB
tables:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual 467 Configure Quality of Service
AV Line of Fully Managed Switches M4250 Series Main User Manual