NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 385)

The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > RIP > Advanced > RIP Configuration.
The RIP Configuration page displays.
6. Select the RIP Admin Mode Enable or Disable radio button to enable or disable RIP
on the switch.
The default is Enable.
7. Select one of the following Split Horizon Mode radio buttons:
• None: No special processing is enabled.
• Simple: A route is not included in updates that are sent to the device from which
it was learned. The default is Simple.
• Poison Reverse: A route is included in updates sent to the device from which it
was learned, but the metric is set to infinity.
Split horizon is a technique for preventing problems that might be caused by
including routes in updates sent to a device from which the route was originally
learned.
8. Select the Auto Summary Mode Enable or Disable radio button to enable or disable
groups of adjacent routes from being summarized in single entries.
If you select the Enable radio button, adjacent routes are summarized in single
entries to reduce the total number of entries. The default is Disable.
9. Select the Host Routes Accept Mode Enable or Disable radio button to enable or
disable the switch from accepting host routes.
If you select the Enable radio button, the switch accepts host routes. The default is
Enable.
10. Select the Default Information Originate Enable or Disable radio button to enable
or disable default route advertisements.
The default is Disable.
11. In the Default Metric field, specify a metric value for redistributed routes.
The range is from 1 to 15. The default is 0.
12. Click the Apply button.
Main User Manual 385 Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual