NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 428)

Table 120. Multicast IPv6 Mroute table information (Continued)
Description Field
The multicast routing protocol which dynamically created this entry. The possible
values are as follows:
• PIM-DM
• PIM-SM
Protocol
The value displayed in this field is valid if the multicast routing protocol is PIM-SM.
The possible values are RPT and SPT. For other protocols a “------” is displayed.
Flags
PIM for IPv6 multicast routing
Protocol-Independent Multicast (PIM) is a standard multicast routing protocol that
provides scalable interdomain multicast routing across the Internet, independent any
particular unicast routing protocol.
You can configure the various PIM settings for IPv6 multicast routing and display the
PIM statistics.
Configure the global PIM IPv6 settings on the switch
Depending on your IPv6 network needs, you can globally enable PIM Sparse Mode
(PIM-SM) or PIM Dense Mode (PIM-DM) on the switch.
To configure the global PIM IPv6 settings on the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > IPv6 PIM > Global Configuration.
Main User Manual 428 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual