NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 387)

• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the Send Version menu, select the version of RIP control packets that the
interface sends:
• None. No RIP control packets are sent.
• RIP-1: Sends RIP version 1–formatted packets through broadcast.
• RIP-1c: Send packets in RIP version 1–compatibility mode and sends RIP version
2–formatted packets through broadcast.
• RIP-2: Send RIP version 2 packets using multicast. The default is RIP-2.
9. From the Receive Version menu, select the version of RIP control packets the
interface accepts:
• RIP-1: Accept RIP version 1–formatted packets only.
• RIP-2: Accept RIP version 2–formatted packets only.
• Both: Accept packets in either RIP version 1 or RIP version 2 format. The default
is Both.
• None: No RIP control packets are accepted.
10. From the RIP Mode menu, select Enable or Disable to enable or disable the RIP
mode for the interface.
Before you enable RIP version 1 or version 1c on an interface, you must first enable
the network-directed broadcast mode (that is, the RIP mode) on the interface. The
default is Disable.
11. From the Authentication Type menu, select the type of authentication:
• None: No authentication protocols is configured. This is the default setting.
• Simple: You are prompted to enter an authentication key. This key is included (in
non-encrypted format) in the RIP header of all packets that are sent on the network.
All devices on the network must be configured with the same key.
• Encrypt: You are prompted to enter both an authentication key and an
authentication ID. Encryption uses the MD5 Message-Digest algorithm. All devices
on the network must be configured with the same key and ID.
12. If you select Simple or Encrypt from he Authentication Type menu, in the
Authentication Key field, enter the RIP authentication key for the interface.
The key can be up to 16 octets long.
Main User Manual 387 Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual