NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 414)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > Mroute Static-Multicast Configuration.
The Mroute Static-Multicast Configuration page displays.
6. Select the check box for the PIM-SSM group.
7. Click the Delete button.
Your settings are saved. The PIM-SSM group is removed.
8. To save the settings to the running configuration, click the Save icon.
Configure an IPv4 PIM interface
You can configure an IPv4 interface for PIM.
To configure an IPv4 PIM interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > PIM > Interface Configuration.
The Interface Configuration page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1: Only physical interfaces are displayed. This is the default setting.
• VLANS: Only VLANs are displayed.
• All: Both physical interfaces and VLANs are displayed.
7. Select one or more interfaces by taking one of the following actions:
Main User Manual 414 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual