beautypg.com

Configure an mld snooping querier for a vlan – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 281

background image

8. In the Query Interval (secs) field, specify the period in seconds between periodic

queries sent by the snooping querier.
The range is from 1 to 1800 seconds. The default is 60 seconds.

9. In the Querier Expiry Interval (secs) field, specify the period in seconds after which

the last querier information is removed.
The range is from 60 to 300 seconds. The default is 60 seconds.

10. Click the Apply button.

Your settings are saved.

The page displays the VLAN IDs enabled for MLD snooping querier.

11. To save the settings to the running configuration, click the Save icon.

Configure an MLD snooping querier for a VLAN

You can configure an MLD querier for use with a VLAN on the network.

To configure an MLD snooping querier for a VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching> Multicast > MLD Snooping > Querier VLAN Configuration.

The Querier VLAN Configuration page displays.

6. Either specify a new VLAN or change an existing VLAN:

• Specify a new VLAN. In the VLAN ID field, enter the ID for a new VLAN.
• Change an existing VLAN. Select the check box for an existing VLAN.

7. From the Querier Election Participate Mode menu, select to enable or disable the

querier election participate mode:

Main User Manual

281

Configure Switching Information

AV Line of Fully Managed Switches M4250 Series Main User Manual