beautypg.com

Remove a tacacs+ server from the switch, Authentication lists, Configure a login authentication list – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 514

background image

Remove a TACACS+ server from the switch

To remove a TACACS+ server from the switch:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Management Security > TACACS+ > TACACS+ Server

Configuration.
The TACACS+ Server Configuration page displays.

6. Select the check box next to the server IP address.

7. Click the Delete button.

The TACACS+ server is removed.

8. To save the settings to the running configuration, click the Save icon.

Authentication lists

An authentication login list specifies one or more authentication methods to validate
switch or port access for an admin or guest user. Access can be HTTP or HTTPS access
to the main UI or AV UI, or line access (that is, Telnet, SSH, or console access) to the CLI.

Configure a login authentication list

A login list specifies the authentication methods to be used to validate switch or port
access. An authentication list can apply to users that access the switch through one of
the following methods:

Secure Shell (SSH): For information about selecting an authentication list for SSH
access, see SSH management access on page 533.

Main User Manual

514

Manage Switch Security

AV Line of Fully Managed Switches M4250 Series Main User Manual