NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 749)

7. Next to Select File, click the Browse button, navigate to the file, and select the file
to download.
You can select a file with a file name of up to 80 characters.
8. Click the Apply button.
The download begins.
The Download Status field displays the status during transfer file to the switch.
Note: After a file transfer starts, wait until the page refreshes. When the page
refreshes, the Select File option is blanked out, indicating that the file transfer is
complete.
9. To save the settings to the running configuration, click the Save icon.
Download a file from a USB storage device to the switch
You can download a text configuration file or license key only from a USB storage device
to the switch.
To download a file from a USB storage device to the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Maintenance > Upgrade > USB File Upgrade.
The USB File Upgrade page displays.
6. From the File Type menu, select the type of file that must be downloaded:
• Software: The system software image, which is saved in one of two flash sectors
called images (image1 and image2). The active image stores the active copy,
while the other image stores a second copy. The device boots and runs from the
active image. If the active image is corrupted, the system automatically boots from
Main User Manual 749 Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual