Configure a captive portal – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 633
To access the network through a captive portal, the client must first enter
authentication information on an authentication web page. When the authentication
session time-out expires and the client is not yet authenticated, the switch disconnects
any active TCP or SSL connection with the client. The range is from 60 to 600 seconds.
The default is 300 seconds.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information on the page.
Table 158. Captive portal global configuration information
Description
Field
The operational status of the captive portal feature, which is either Enabled or
Disabled.
Operational Status
If the captive portal feature is disabled, the reason that it is disabled:
• Administrator Disabled
• IP Address Not Configured
• No IP Routing Interface
• Routing Disabled
Disabled Reason
The IP address that the captive portal uses.
CP IP Address
The total number of captive portals that are supported on the switch.
Supported Captive Portals
The number of captive portals that are configured on the switch.
Configured Captive Portals
The number of captive portal that are operationally enabled (active).
Active Captive Portals
The total number of users that can be authenticated locally and remotely on
the switch.
System Supported Users
The total number of users that can be authenticated locally on the switch.
Local Supported Users
The number of local users that are configured on the switch.
Configured Local Users
The number of users that are authenticated for all captive portal on the switch.
Authenticated Users
Configure a captive portal
By default, the switch provides one default captive portal. You can change the settings
for the default captive portal. You can also add and configure up to nine additional
portals.
Main User Manual
633
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual