NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 554)

the assigned VLAN is dynamically created. This means that the client can connect
from any port and is assigned to the appropriate VLAN. This feature gives flexibility
for clients to move around the network without much additional configuration
required. The default is Disable.
11. From the Monitor Mode menu, select Disable or Enable.
If enabled, this option lets the switch monitor the dot1x authentication process and
can help you to diagnose authentication failures, if they occur. The default is Disable.
12. From the Users menu, select the user name to which the login list that you can select
in the next step must apply.
13. From the Login menu, select the login list that applies to the user name that you
select in the previous step.
If 802.1X is enabled, the default dot1xList applies for authentication, as displayed
in the Authentication List field.
The Software Version field always display 0.
14. Click the Apply button.
Your settings are saved.
15. To save the settings to the running configuration, click the Save icon.
Manage port authentication on individual ports
You can enable and configure port access control on one or more physical ports.
Configure 802.1X settings for a port You can configure 802.1X port access
control settings for one or more ports.
To configure 802.1X settings for a port:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 554 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual