NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 317
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MRP > Basic > MRP Configuration.
The MRP Configuration page displays.
6. Select the MVRP Mode Enable or Disable radio button to specify the global
administrative mode of MVRP on the switch.
Enabling this mode lets MVRP register VLANs in the network, enabling automatic
VLAN configuration on the device. The default is Disable.
7. Select the MMRP Enable or Disable radio button to specify the global administrative
mode of MMRP on the switch.
Enabling this mode allows for the propagation of MAC address information in the
network. In turn, this allows for the registration and deregistration of both individual
MAC address information and group MAC address membership. The default is
Disable.
8. Select the MSRP Enable or Disable radio button to specify the global administrative
mode of MSRP on the switch.
Enabling this mode allows the switch to reserve resources in the network to facilitate
time-sensitive traffic to flow end to end. The default is Disable.
9. Select the Periodic State Machine (MVRP Mode) Enable or Disable radio button.
Enabling this mode can limit the effect of MVRP topology changes and reduce the
number of protocol data units (PDUs) transmitted between devices. The default is
Disable.
10. Select the Periodic State Machine (MMRP) Enable or Disable radio button.
Enabling this mode can limit the effect of MMRP topology changes and reduce the
number of protocol data units (PDUs) transmitted between devices. The default is
Disable.
11. In the MSRP Max Fan In Ports field, specify the maximum number of interfaces on
which MSRP registrations are allowed.
The range is from 0 to 12. The default is 0, which means that no limit is imposed on
the number of interfaces.
12. Select the MSRP Boundary Propagation Enable or Disable radio button.
Main User Manual
317
Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual