NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 198)

• Trunk: Select this mode if the interface is connected to another switch or to a
router. A trunk interface can participate in multiple VLANs and accept both tagged
and untagged packets.
9. Do one of the following, depending on your selection in the previous step:
• Access: If you selected Access from the Switch port Mode menu, from the Access
VLAN ID menu, select the access VLAN for the interface.
• Trunk: If you selected Trunk from the Switch port Mode menu, do the following:
a. From the Native VLAN ID menu, select the native VLAN for the interface.
b. In the Trunk Allowed VLANs field, enter the VLANs of which the interface can
be a member when the switch port mode for the interface Trunk
By default, the field includes all VLANs, even if they are not yet created. VLAN
IDs are in the range from 1 to 4093. Use a hyphen (-) to specify a VLAN range,
or a comma (,) to separate VLAN IDs in a list. Spaces are not permitted. A zero
value clears the allowed VLANs. If you enter All, all VLANs in the range from 1
to 4093 are included.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Main User Manual 198 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual