beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 266

background image

To configure an IGMP snooping querier for a VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > Multicast > IGMP Snooping > Querier VLAN Configuration.

The Querier VLAN Configuration page displays.

6. Either specify a new VLAN or change an existing VLAN:

• Specify a new VLAN: In the VLAN ID field, enter the ID for a new VLAN.
• Change an existing VLAN: Select the check box for an existing VLAN.

7. From the Querier Election Participate Mode menu, select to enable or disable the

querier election participate mode:

• Disabled. If the switch detects another querier of the same version in the VLAN,

the snooping querier moves to the non-querier state.

• Enabled: The snooping querier participates in querier election, in which the lowest

numbered IP address operates as the querier in that VLAN. The other querier
moves to non-querier state.

By default, the querier election participate mode is enabled for VLAN 1.

8. In the Snooping Querier VLAN Address field, specify the IP address to be used as

the source IP address in periodic IGMP queries that are sent on the VLAN.

9. Either add the new VLAN or save the settings for the existing VLAN:

• Add the new VLAN: Click the Add button.

The VLAN is added.

• Save the settings for the existing VLAN: Click the Apply button.

Your settings are saved.

10. To save the settings to the running configuration, click the Save icon.

The following table describes the nonconfigurable fields on the page.

Main User Manual

266

Configure Switching Information

AV Line of Fully Managed Switches M4250 Series Main User Manual