beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 58

background image

The IPv6 management VLAN is used for management of the switch. You can configure
any value in the range of 1 to 4093.

7. Select the IPv6 Enable Mode Enable or Disable radio button to specify he

administration mode for the IPv6 management VLAN.

8. Select the Address Autoconfigure Mode Enable or Disable radio button to specify

the address autoconfiguration mode.
If you enable this mode, the IPv6 network settings (IPv6 prefix and prefix length) are
automatically configured for the configured management VLAN interface. By default,
for VLAN 1, the mode is enabled so that the settings are automatically configured.

Note: The Address Autoconfigure mode option is available only if unicast routing
is globally disabled.

9. Select the Address DHCP Mode Enable or Disable radio button to specify if the

IPv6 settings are obtained from a DHCP server.

10. Click the Apply button.

Your settings are saved.

11. To save the settings to the running configuration, click the Save icon.

Note: If you need to reset the IPv6 management interface, in the Reset IPv6 Management
Interface section of the page, select the Set Management Interface to Default check
box and click the Apply button. Doing so deletes the IPv6 management interface
configuration.

The Current IPv6 Management Interface Status section displays the following
nonconfigurable fields.

Table 14. Current IPv6 management interface status information

Description

Field

The IPv6 management interface. (By default, no IPv6 management
interface is configured).

Management Interface

Indicates if the link status is up or down.

Link State

Indicates if the link status is up or down for the IPv6 management interface.

IPv6 Routing Interface
Status/Operational Mode

The MAC address that is assigned to the IPv6 management interface.

MAC Address

Indicates if IPv6 is enabled or disabled on the IPv6 management interface.

IPv6 Enable Mode

Main User Manual

58

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual