beautypg.com

Configure an enable authentication list – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 517

background image

To delete a login authentication list:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Management Security > Authentication List > Login

Authentication List.
The Login Authentication List page displays.

6. Select the check box that is associated with the list.

7. Click the Delete button.

Your settings are saved. The list is removed.

8. To save the settings to the running configuration, click the Save icon.

Configure an enable authentication list

An enable list specifies the authentication methods to validate privileged EXEC access
in the CLI. An enable list can apply to users that access the switch CLI through one of
the following methods:

Secure Shell (SSH): For information about selecting an enable list for SSH access,
see SSH management access on page 533.

Telnet: For information about selecting an enable list for Telnet access, see Telnet
management access
on page 539.

Console port: For information about selecting an enable list for console port access,
see Console port management access on page 542.

Two default lists are present: enableList and enableNetList. You cannot delete these
lists.

The preconfigured users (admin and guest) are assigned to the enableList until you
specifically select a different list.

Main User Manual

517

Manage Switch Security

AV Line of Fully Managed Switches M4250 Series Main User Manual