NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 78)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > Time > Daylight Saving Configuration.
The Daylight Saving Configuration page displays.
6. To refresh the page, click the Refresh button.
The following table displays the nonconfigurable daylight saving (DST) status
information.
Table 18. Daylight saving status information
Description Field
The Daylight Saving value, which is one of the following:
• Disable
• Recurring
• Recurring EU
• Recurring USA
• Non Recurring
Daylight Saving (DST)
Displays when the daylight saving time begins. This field is not displayed
when daylight saving time is disabled.
Begins At
Displays when the daylight saving time ends. This field is not displayed when
daylight saving time is disabled.
Ends At
The offset value in minutes.This field is not displayed when daylight saving
time is disabled.
Offset (in Minutes)
Main User Manual 78 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual