beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 746

background image

• Public Key Image: The public key file used for code image validation.
• Application: Files for an application.
• Tech Support Commands File: A file with tech support commands.
• DHCP Client Configuration File: The DHCP client configuration file with the

DHCP server (host) information.

7. If the selection from the File Type menu is Software, the Image Name menu displays

and you must select the software image that must be downloaded to the switch:

• Image1: Select image1 to upload image1.
• Image2: Select image2 to upload image2.

We recommended that you do not overwrite the active image.

8. If the selection from the File Type menu is Software, the Verify radio buttons display

so that you can select one of the following options:

• None: Verification of the downloaded file is disabled. This is the default setting.
• Verify: The digital signature of the downloaded file is verified.
• No Verify: The digital signature of the downloaded file is not verified.

9. If the selection from the File Type menu is Application, the Application File Name

field displays and you must specify the application file name.

10. From the Transfer Mode menu, specify the protocol that must be used to transfer

the file to the server:

• TFTP: Trivial File Transfer Protocol.
• SFTP: Secure File Transfer Protocol. This selection requires you to specify a user

name and password.

• SCP: Secure Copy Protocol. This selection requires you to specify a user name

and password.

• FTP: File Transfer Protocol. This selection requires you to specify a user name and

password.

11. From the Server Address Type menu, select the format for the Server Address

field:

• IPv4: Indicates that the server address is an IPv6 address in dotted-decimal format.

This is the default setting.

• IPv6: Indicates that the server address is an IPv6 address in hexadecimal numbers

using 16-bit values between colons.

• DNS: Indicates that the server address is a host name.

12. In the Server Address field, enter the IP address of the server in accordance with

the format indicated by the server address type.

Main User Manual

746

Maintenance and
Troubleshooting

AV Line of Fully Managed Switches M4250 Series Main User Manual