NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 278)

6. Select the VLAN for which you want to remove the IGMP snooping querier settings.
7. Click the Delete button.
Your settings are saved. (The VLAN itself is not deleted.)
8. To save the settings to the running configuration, click the Save icon.
Configure an MLD multicast router interface
You can configure an interface as the designated interface to which a multicast router
is attached. All MLD packets snooped by the switch are forwarded to the multicast router
that is reachable from this interface. We refer to this interface as the multicast router.
In most situations, this configuration is not required because the switch automatically
detects a multicast router and forwards MLD packets accordingly. This configuration
might be required in a complex network if you want to make sure that the multicast
router always receives MLD packets from the switch.
To configure an MLD multicast router interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Multicast > MLD Snooping > Multicast Router Configuration.
The Multicast Router Configuration page displays.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
• 1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed.
7. Select one or more interfaces by taking one of the following actions:
Main User Manual 278 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual