beautypg.com

Delete a mac filter – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 565

background image

If a packet with the MAC address and VLAN ID that you specify is received on a port
that is not part of the inbound filter, the packet is dropped.

10. In the Port and LAG tables in the Destination Port Members section, select the ports

and LAGs that must be included in the outbound filter.
A packet with the MAC address and VLAN ID that you specify can be transmitted
only from a port that is part of the outbound filter.

Note: Destination ports can be included only in a multicast filter. A multicast filter
is determined by the MAC address that you enter in the MAC Address field.

11. Click the Apply button.

Your settings are saved.

12. To save the settings to the running configuration, click the Save icon.

Delete a MAC filter

You can remote an existing MAC filter that you no longer need.

To delete a MAC filter:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Traffic Control > MAC Filter.

The MAC Filter Configuration page displays.

6. From the MAC Filter menu, select the MAC filter.

7. Click the Delete button.

The filter is removed.

8. To save the settings to the running configuration, click the Save icon.

Main User Manual

565

Manage Switch Security

AV Line of Fully Managed Switches M4250 Series Main User Manual