NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 535)

This list is used to authenticate users who try to get privileged EXEC access. The
default list is enableList. For more information about enable authentication lists, see
Configure an enable authentication list on page 517.
11. In the SSH Port field, specify the port for SSH access.
The range is from range from 1 to 65535. The default port number is 22.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields that display on the page.
Table 145. SSH configuration information
Description Field
The switch can accept connections from an SSH client using protocol level 2 for
SSH (SSH-2). Protocol level 2 for SSH is enabled by default. SSH Version
The number of active SSH sessions between remote SSH clients and the switch. Current Number of SSH
Sessions
Displays if one or both (if any) of the following keys are present on the device:
• SSH-2 Rivest-Shamir-Adelman (RSA) key file (PEM encoded)
• SSH-2 Digital Signature Algorithm (DSA) key file (PEM encoded)
If no keys are presents, No is displayed.
Keys Present
Manage RSA and DSA keys for SSH access
You can manage Rivest-Shamir-Adelman (RSA) and Digital Signature Algorithm (DSA)
keys for SSH access to the switch.
Generate an RSA or DSA key
Note: To generate an SSH key file, SSH must be disabled (see Configure the global
SSH access settings on page 534).
To generate an RSA or DSA key:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 535 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual