Remove an access profile – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 551
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays. The Activate Profile check box is
selected.
6. Select the Deactivate Profile check box.
7. Click the Apply button.
Your settings are saved and the access profile is now deactivated.
8. To save the settings to the running configuration, click the Save icon.
Remove an access profile
You can remove an access profile that you no longer need. Before you can remove the
access profile, you must deactivate it (see Deactivate an access profile on page 550).
To remove an access profile:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays. The Deactivate Profile check box
is selected.
6. Select the Remove Profile check box.
7. Click the Apply button.
The access profile is removed.
8. To save the settings to the running configuration, click the Save icon.
Main User Manual
551
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual