NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 761
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Maintenance > Troubleshooting > Traceroute IPv6.
The Traceroute IPv6 page displays.
6. In the IPv6 Address/Host Name field, enter the IPv6 address or host name of the
device for which the path must be discovered.
7. In the Probes Per Hop field, enter the number of probes per hop.
The default value is 3. The range is from 1 to 10.
8. In the Max TTL field, enter the maximum time to live (TTL) for the destination.
The default value is 30. The range is from 1 to 255.
9. In the Init TTL field, enter the initial TTL to be used.
The default value is 1. The range is from 1 to 255.
10. In the MaxFail field, enter the maximum number of failures allowed in the session.
The default value is 5. The range is from 1 to 255.
11. In the Interval (secs) field, enter the time between probes in seconds.
The default value is 3. The range is from 1 to 60.
12. In the Port field, enter the UDP destination port for the probe packets.
The default value is 33434. The range is from 1 to 65535.
13. In the Size field, enter the size of the probe packets.
The default value is 0. The range is from 0 to 39936.
14. From the Source menu, as an option, you can select the IP address or interface that
must be used to send probe packets:
• None: The source address of the probe packet is the address of the default egress
interface.
• IPv6 Address: The source IP address that must be used when echo request
packets are sent. With this selection, the IPv6 Address field displays and you
must enter the IPv6 address that must be used as the source.
Main User Manual
761
Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual