NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 681)

Table 163. IPv6 ACL information (Continued)
Description Field
The maximum number of ACLs that can be configured on the switch. Rules
The type is IPv6 ACL. Type
Change the name of an IPv6 ACL To change the name of an IPv6 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 ACL.
The IPv6 ACL page displays.
6. Select the check box that is associated with the IPv6 ACL.
7. In the IPv6 ACL field, specify the new name.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Delete an IPv6 ACL To delete an IPv6 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 681 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual