beautypg.com

Configure the mld snooping settings for interfaces – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 272

background image

This enables or disables an MLD proxy querier on the system. If it is disabled, then
an MLD proxy query with source IP 0::0 is not sent in response to an MLD leave
packet. If it is enabled, then MLD proxy queries are sent. The default is Enable.

8. Select the Exclude Mrouter Interface Mode Enable or Disable radio button.

This selection specifies the type of information that is forwarded to the upstream
multicast router interface.

If enabled, the switch blocks all unknown multicast data through the mrouter port,
whether the port is configured dynamically or statically. Only MLD PDUs are allowed
to pass through the mrouter port to the upstream router interface.

The default is Enable. If disabled, the switch forwards both unknown multicast data
and MLD PDUs to the upstream multicast router interface.

Note: For information about MLD Plus mode, see Configure MLD snooping
automatically with MLD Plus mode
on page 269.

9. Click the Apply button.

Your settings are saved.

10. To save the settings to the running configuration, click the Save icon.

11. To refresh the page, click the Refresh button.

The following table describes the nonconfigurable fields on the page.

Table 71. MLD snooping configuration information

Definition

Field

The number of multicast control frames that were processed.

Multicast Control Frame Count

The interface on which MLD snooping is administratively enabled. MLD

snooping must be enabled globally and on an interface for the interface

to be able to snoop MLD packets to determine which segments should

receive multicast packets directed to the group address.

Interfaces Enabled for MLD

Snooping

The VLAN on which MLD snooping is administratively enabled.

VLAN IDs Enabled For MLD

Snooping

Configure the MLD snooping settings for interfaces

You can configure the MLD snooping settings for interfaces.

Main User Manual

272

Configure Switching Information

AV Line of Fully Managed Switches M4250 Series Main User Manual