NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 764)

• Password: Specify the password for remote login to the server.
8. In the File Path field, specify the path to the location to store the core dump file.
9. In the File Name field, specify the core dump file name.
The default name is core.
10. To append the host name to the core dump file name, select the Hostname check
box.
11. To append a time stamp to the core dump file name, select the Time-stamp check
box.
This check box is selected by default.
12. To dump the switch chip register in case of an exception, select the Switch Register
Dump check box.
13. Select one of the following check boxes:
• Write Core Test: To generate a test core dump but do not transfer it to the server
or USB storage device, select the Write Core Test check box.
• Write Core: To generate a core dump and transfer it to the server or USB storage
device, select the Write Core check box.
14. If you select the Write Core check box, to save the current settings, select the Save
Current Settings check box.
This check box is selected by default.
CAUTION: The switch reboots after you click the Apply button.
15. Click the Apply button.
The memory dump is sent to the specified location. The switch reboots. The process
takes about 135 seconds.
Main User Manual 764 Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual