NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 404)

To display the IGMP groups and search the IGMP group database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > IGMP Groups.
The IGMP Groups page displays.
6. To search for IGMP group entries by interface or group, select one of the following
options from the Search menu:
• Interface: Select Interface from the menu, specify the interface in unit/port format
(for example 0/8), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• Group: Select Group from the menu, specify the multicast group IPv4 address,
and click the Go button.
If the entry exists, that entry with the matching group IPv4 address is displayed
as the first entry, followed by the remaining entries. An exact match is required.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 112. IGMP group information
Description Field
The interface on which IGMP is enabled. Interface
The IP multicast group address. Multicast Group IP
The IP address of the source of the last membership report that was received
for the IP multicast group address on the interface.
Last Reporter
Main User Manual 404 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual