NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 524)

The System Information page displays.
5. Select Security > Management Security > Login Sessions.
The Login Sessions page displays.
The following table describes the fields that are shown in the table.
Table 144. Login Sessions
Description Field
Identifies the ID of this row. ID
The user's name whose session is open. User Name
The machine from which the user is connected. Connection From
The idle session time. Idle Time
The total session time. Session Time
The type of session: Telnet, Serial, SSH, HTTP, or HTTPS. Session Type
HHTP and HTTPS management access
You can configure HTTP and secure HTTP (HTTPS) access to the switch’s management
interface.
Configure HTTP access settings
You can configure the HTTP access settings on the switch. If you access the switch device
UI, HTTP is the default access method.
To configure the HTTP access settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 524 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual