NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 36
5. Select System > Management > System Information.
6. Define the following fields:
• System Name: Enter the name to identify this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
• System Location: Enter the location of this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
• System Contact: Enter the contact person for this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
• Login Timeout: Specify how many minutes of inactivity can occur on a serial port
connection before the switch closes the connection. Enter a number between 0
and 160 minutes. The factory default is 5. Entering 0 disables the time-out.
• Management Source Interface: Select the management interface that is used
as source interface for SNMP trap, syslog, DNS, TACACS+, RADIUS, sflow, and
SNTP applications. Possible values are as follows:
•
None
•
Routing Interface
•
Routing VLAN
Main User Manual
36
Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual