Export a file from the switch, Export a file from the switch to a server – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 739
The System Information page displays.
5. Select Maintenance > Reset > Factory Default.
The Factory Default page displays.
6. Select the check box.
7. Click the Apply button.
A confirmation pop-up window displays.
8. Click the OK button to confirm.
The configuration is reset to the factory default settings.
Export a file from the switch
You can export configuration (ASCII) or log (ASCII log) files from the switch to a file
server over a TFTP, SFTP, SCP, or FTP session, to a computer over an HTTP session, or
to a USB storage device.
Export a file from the switch to a server
You can upload (export) configuration (ASCII or log ASCII) and other types of files from
the switch to a TFTP, SFTP, SCP, or FTP server on the network.
To export a file from the switch to a server:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Maintenance > Export > File Export.
The File Export page displays.
6. From the File Type menu, select the type of file that must be exported:
Main User Manual
739
Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual