NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 251)

To remove the IGMP snooping entries from the multicast forwarding database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Multicast > MFDB > MFDB Table.
The MFDB Table page displays.
6. Click the Clear button.
Your settings are saved.
7. To save the settings to the running configuration, click the Save icon.
Remove all known multicast MAC entries from the multicast
forwarding database
You can remove all known multicast MAC entries from the multicast forwarding database.
To remove all known multicast MAC entries from the multicast forwarding database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 251 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual