NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 518)

All newly added users are also assigned to the enableList until you specifically select a
different list.
To configure an enable authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > Authentication List > Enable
Authentication List.
The Enable Authentication List page displays.
6. Do one of the following:
• Create a new list: In the List Name field, specify a name.
The name can be up to 15 alphanumeric characters long and is not case-sensitive.
• Modify an existing list: Select the check box that is associated with the list.
7. From the menu in the 1 column, select the authentication method that must be used
first in the selected authentication login list.
If you select a method that does not time out as the first method, such as Local, no
other method is tried, even if you specified more than one method. User
authentication occurs in the order that you select the methods:
• Enable: The privileged EXEC password is used for authentication.
• Line: The line password is used for authentication.
• None: The user is allowed access without authentication.
• Radius: The user's name and password are authenticated using the RADIUS server
instead of the local server.
• Tacacs: The user's name and password are authenticated using the TACACS
server instead of the local server.
• Deny: The user is always denied access.
8. From the menus in the 2, 3, 4, and 5 columns, select the authentication methods, if
any, that must be used in the selected authentication login list.
Main User Manual 518 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual