NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 442)

Table 124. MLD Routing Interface Configuration
Description Field
The operational status of MLD on the Interface. Operational Mode
The robustness setting for the interface. The default value is 2. Robustness
Display the statistics for the MLD routing interfaces
You can display the statics for the MLD routing interfaces.
To display the statistics for the MLD routing interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > MLD > Routing Interface Statistics.
The Routing Interface Statistics page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1: Only physical interfaces are displayed. This is the default setting.
• VLANS: Only VLANs are displayed.
• All: Both physical interfaces and VLANs are displayed.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Main User Manual 442 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual