NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 175
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > LLDP-MED > Remote Device Information.
The Remote Device Information page displays.
6. From the Interface menu, select an interface on which the reception of LLDP-MED
frames is enabled.
The Remote ID field displays the ID that is assigned to the remote device.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 46. LLDP-MED remote device information
Description
Field
Capability Information
Displays the supported capabilities that are received in LLDP-MED frames.
The system capabilities that are supported on the remote device.
Supported Capabilities
The system capabilities that are enabled on the remote device.
Enabled Capabilities
The device class that is advertised by the remote device.
The device class can be Generic, Media, Communication, or Network
Connectivity.
Device Class
Network Policies Information
Displays the network policies information that is received in LLDP-MED frames.
Main User Manual
175
Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual