NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 360)

14. From the Autonomous Flag menu, to enable or disable the prefix from being used
for on-link determination.
If enabled, the prefix can be used for autonomous address configuration.
15. Do one of the following:
• If you are adding a new prefix, click the Add button.
Your settings are saved. The prefix is added for the interface.
• If you are changing an existing prefix, click the Apply button.
Your settings are saved.
The Current State field displays the state of the IPV6 address. The state is TENT
(tentative) if routing is disabled or DAD (Duplicate Address Detection) fails. The state
is Active if the interface is active and DAD is successful.
16. To save the settings to the running configuration, click the Save icon.
Delete a prefix setting from an IPv6 routing interface
You can delete a prefix and associated settings that you no longer need for an IPv6
routing interface.
To a delete prefix settings from an IPv6 routing interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing> IPv6 > Advanced > Prefix Configuration.
The Prefix Configuration page displays.
6. From the Interface menu, select the interface.
7. Select the check box for the prefix.
8. Click the Delete button.
Your settings are saved. The prefix is removed.
Main User Manual 360 Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual