NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 331)

Table 90. MSRP streams information
Description Field
A 16-bit unsigned integer value, which is a unique ID used to distinguish the
stream among multiple streams from the same device.
Stream ID
The MAC address of the traffic stream’s source. Stream Source MAC Address
The 32-bit unsigned accumulated latency value that is used to determine the
worst-case latency that a stream can suffer in its path from the talker to a
listener. The latency starts with zero and is increased by one for each device
that the stream propagates through in the network.
Received Accumulated
Latency
Shows whether the stream is class A or class B. Class A traffic receives higher
priority than class B traffic.
Traffic Class
The 5-bit unsigned rank value that is used by devices to determine which
streams can still be served when the MSRP registrations exceed the capacity
of an interface to carry the corresponding data streams.
If a device becomes oversubscribed (for example, a network reconfiguration
or 802.11 bandwidth reduction occurs), the rank value is also used to
determine which stream are dropped. A lower numeric value is more important
than a higher numeric value.
Rank
The 32-bit unsigned bandwidth value that is used to allocate resources and
adjust queue selection settings to supply the quality of service that is requested
by an MSRP talker. The value represents the maximum rate, in units of 1024
octets per second, at which frames in the stream referenced by the talker can
be transmitted.
TSpec Max Frame Size
The 32-bit unsigned frame rate value that is used to allocate resources and
adjust queue selection settings to supply the quality of service that is requested
by an MSRP talker. The value represents the maximum number of frames that
the talker can transmit in one second.
TSpec Max Interval Frames
The VLAN ID of the traffic stream. Stream VLAN
The MAC address of the traffic stream’s destination. Destination MAC
If a failure occurred, the interface of the device on which the failure occurred. Received Failure Information
Bridge Interface
Main User Manual 331 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual