NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 104)

13. From the NetBIOS Node Type menu, select one of the following NetBIOS node types
for DHCP clients:
• b-node Broadcast
• p-node Peer-to-Peer
• m-node Mixed
• h-node Hybrid
14. In the Next Server Address field, enter the IP address of the next server in the boot
process for a DHCP client.
15. In the Domain Name field, enter the domain name in the boot process for a DHCP
client.
The domain name can be up to 255 characters in length.
16. In the Bootfile field, enter the name of the default boot image in the boot process
for a DHCP client.
The domain name can be up to 128 characters in length.
17. Click the Add button.
The pool configuration is added.
18. To save the settings to the running configuration, click the Save icon.
Change a DHCP pool You can change an existing DHCP pool.
To change a DHCP pool:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > DHCP Server > DHCP Pool Configuration.
The DHCP Pool Configuration page displays.
6. From the Pool Name menu, select the pool.
Main User Manual 104 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual