NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 547)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.
6. In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.
7. Click the Apply button.
Your settings are saved. By default, the access profile is deactivated. After you add
rules, you can activate the access profile.
8. To save the settings to the running configuration, click the Save icon.
Add a rule to the access profile
After you add the access profile, you can add one or more security access rules to the
access profile.
If you access the switch from a computer, make sure that you add a permit rule for the
type of service that you use (for example, HTTPS), your computer’s IP address, and your
computer’s subnet mask.
CAUTION: You must add a permit rule for your device and access method, otherwise
you are locked out from the switch after you activate the access profile. If that situation
occurs, you must reset the switch to factory default settings (see Reset the switch to the
factory default settings on page 738).
To add a rule to the access profile:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 547 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual