NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 502
• None: The primary IP address of the originating (outbound) interface is used as
the source address.
• Routing interface: The primary IP address of a physical port is used as the source
address.
• Routing VLAN: The primary IP address of a VLAN routing interface is used as the
source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Service port: The management port source IP is used as the source address.
By default, VLAN 1 is used as source interface.
CAUTION:
The maximum delay in receiving a RADIUS response on the switch equals
the maximum number of retransmissions multiplied by the time-out period multiplied
by the number of configured RADIUS servers. If the RADIUS request was generated
by a user login attempt, all user interfaces are blocked until the switch receives a
RADIUS response.
7. In the Max Number of Retransmits field, specify the maximum number of times a
request packet is retransmitted to the RADIUS server.
The range is from 1 to 15. The default value is 4.
8. In the Timeout Duration field, specify the time-out value, in seconds, for request
retransmissions.
The range is from 1 to 30. The default value is 5.
9. Select the Accounting Mode Disable or Enable radio button.
This selection specifies if the RADIUS accounting mode is enabled on the current
server. By default, the selection is Disable.
10. Select the RADIUS Attribute 4 Mode Disable or Enable radio button.
This selection specifies if RADIUS attribute 4 is enabled on the current server. By
default, the selection is Disable. If you select the Enable radio button, the RADIUS
Attribute 4 Value field displays, enabling you to enter an IPv4 address for the RADIUS
attribute 4 option.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Main User Manual
502
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual