NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 532)

Before you transfer a file from a server to the switch, the following conditions must be
true:
• The file that you transfer from a server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch contains a path to the server.
Note: Before you can transfer a certificate, you must disable HTTPS (see Configure the
HTTPS access settings on page 526) and log back in to the device UI over an HTTP session.
After you transfer the certificate, you can reenable HTTPS and log back in to the device
UI over an HTTPS session.
To transfer an HTTPS certificate to the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > HTTPS > Certificate Download.
The Certificate Update page displays.
6. From the File Type menu, select the type of SSL certificate to download:
• SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate file (PEM
Encoded)
• SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded)
• SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak
Encryption Parameter file (PEM Encoded)
• SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded)
7. From the Transfer Mode menu, select the protocol that must be used to transfer
the file:
• TFTP: Trivial File Transfer Protocol
Main User Manual 532 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual