NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 42)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > System CPU Status.
The System CPU Status page displays.
The CPU memory status includes the total memory of the switch in KBytes and the
available memory space for the switch in KBytes.
The CPU utilization shows the CPU utilization by the various processes on the switch.
Configure the CPU thresholds
You to configure CPU thresholds that, when crossed, trigger a notification. The
notification occurs through SNMP trap and syslog messages.
To configure the CPU thresholds:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > System CPU Status > CPU Threshold.
The CPU Threshold page displays.
6. Configure the following CPU threshold settings:
• Rising Threshold: Configure the rising threshold value. A notification is generated
when the total CPU utilization exceeds this threshold value over the configured
time period. The range is a percentage from 1 to 100.
• Rising Interval: Configure the rising interval value. Configure this utilization
monitoring time period from 5 to 86400 seconds in multiples of 5 seconds.
• Falling Threshold: Configure the falling threshold. A notification is triggered
when the total CPU utilization falls below this level for a configured period of time.
Main User Manual 42 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual