NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 60
If the Address Autoconfigure Mode is enabled, the autoconfigured IPv6 prefix and
prefix length are displayed in the IPv6 VLAN Interface Configuration section.
6. To add an IPv6 address, in the IPv6 VLAN Interface Configuration section, do the
following:
a. In the IPv6 Prefix/Prefix Length field, specify the IPv6 address and prefix length
that you want to add.
b. From the EUI64 menu, select True to enable the Extended Universal Identifier
(EUI) flag for the IPv6 address, or select False to omit the flag.
c. Click the Add button.
The IPv6 address is added to the IPv6 management VLAN.
7. To remove an IPv6 address, in the IPv6 VLAN Interface Configuration section, do the
following:
a. Select the check box for the IP address and prefix that you want to remove.
b. Click the Delete button.
The IPv6 address is removed from the IPv6 management VLAN.
8. To save the settings to the running configuration, click the Save icon.
Manage the IPv6 default route addresses for the IPv6
management VLAN
You can add an IPv6 default route address that is specific to the IPv6 management VLAN.
You can also remove an IPv6 default route address that you no longer need for the IPv6
management VLAN.
To add or remove an IPv6 default route address for the IPv6 management VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual
60
Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual