NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 513
The key can be from 0 to 128 characters. The key must match the key used on the
TACACS+ server.
10. In the Connection Timeout field, specify the time that passes before the connection
between the device and the TACACS+ server times out.
The range is from 1 to 30 seconds.
11. Click the Add button.
The server is added to the switch.
12. To save the settings to the running configuration, click the Save icon.
Modify the settings for a TACACS+ server on the switch
To modify the settings for a TACACS+ server on the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > TACACS+ > TACACS+ Server
Configuration.
The TACACS+ Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Modify the configuration for the selected TACACS+ server.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Main User Manual
513
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual