NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 382
The range is from 15 to 21600 seconds. The default is 1200 seconds.
7. In the Response Time field, specify the period in seconds that the switch waits for
an ARP response to an ARP request that it sends.
The range is from 1 to 10 seconds. The default is 1 second.
8. In the Retries field, specify the maximum number of times an ARP request is retried
after the switch does not receive an ARP response.
This number includes the initial ARP request. The range is from 0 to 10. The default
is 4.
9. In the Cache Size field, specify the maximum number of entries allowed in the ARP
table.
This number includes all static and dynamic ARP entries.The range is from 384 to
4096. The default is 4096.
10. Select the Dynamic Renew Enable or Disable radio button to enable or disable
dynamic ARP entries to attempt to be automatically renewed after aging out.
The default is Enable.
11. To remove certain entries from the ARP table, select one of the following options
from the Remove From Table menu:
• All Dynamic Entries: All dynamic entries will be removed.
• All Dynamic and Gateway Entries: All dynamic and gateway entries will be
removed.
• Specific Dynamic/Gateway Entry: You must specify the IP address of the specific
dynamic entry or specific gateway entry in the Remove IP Address field.
• Specific Static Entry: You must specify the IP address of the specific static entry
in the Remove IP Address field.
12. Click the Apply button.
Your settings are saved.
13. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Main User Manual
382
Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual