NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 789)

Table 177. System features default settings (Continued)
Default Feature Name/Setting
SNMPv1/v2
None Community configuration
None Trap configuration
SNMPv1/v2 Trap Flags
Enabled Authentication
Enabled Link up/down
Enabled Multiple users
Enabled Spanning tree
Disabled ACL
Disabled Captive portal
Disabled PIM
Enabled PoE
SNMPv3
admin User name
Read/Write SNMPv3 access mode
MD5 Authentication protocol
password Authentication key
None Encryption protocol
Encryption key
None Trap configuration
LLDP, Global
30 TLV advertised interval
4 Hold multiplier
2 Reinitializing delay
5 Transmit delay
LLDP, Interface
Enabled Transmit
Main User Manual 789 Software Default Settings and
Hardware Specifications
AV Line of Fully Managed Switches M4250 Series Main User Manual