Loopback interface – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 46
The following table describes the information in the USB Memory Statistics section.
Table 9. USB Memory Statistics information
Description
Field
The USB flash device storage size in bytes.
Total Size
The size of memory used on the USB flash device.
Bytes Used
The size of memory free on the USB flash device.
Bytes Free
The following table describes the information in the USB Directory Details section.
Table 10. USB Directory Details information
Description
Field
The name of the file stored in the USB flash drive.
File Name
The size of the file stored in the USB flash drive in bytes
File Size
The last modification time of the file stored in the USB flash drive.
Modification Time
Loopback interface
You can create, configure, and remove loopback interfaces.
To configure a loopback interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual
46
Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual