NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 709)

The message was generated as severity 189 (Notice, level 5) on January 5, 2021 at
00:00:18 a.m. by component AAA. The message indicates that the administrator
successfully logged on to the HTTP management interface from a host with IP address
192.168.1.111.
The severity number in the message is generated by a combination of the facility
and the severity. In the previous example, the default facility of 23 is multiplied by
8 and the severity (5) is added: (23 * 8) + 5 = 189
11. To refresh the page, click the Refresh button.
12. To clear the log, click the Clear button.
13. To save the settings to the running configuration, click the Save icon.
Message log format
This topic applies to the format of all logged messages that are displayed for the message
log, persistent log, or console log.
Messages logged to a collector or relay through syslog use an identical format:
• <15>Aug 24 05:34:05 0.0.0.0-1 MSTP[2110]: mspt_api.c(318) 237%% Interface 12
transitioned to root state on message age timer expiry.
This example indicates a message with severity 7 (15 mod 8) (debug) on a switch
and generated by component MSTP running in thread ID 2110 on Aug 24 05:34:05
by line 318 of file mstp_api.c. This is the 237th message logged with system IP 0.0.0.0
and task-ID 1.
• <15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237%% Interface 12
transitioned to root state on message age timer expiry.
This example indicates a user-level message (1) with severity 7 (debug) on a system
that is not a switch and generated by component MSTP running in thread ID 2110
on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged.
Messages logged to a collector or relay through syslog use a format identical to the
previous message.
• Total number of Messages: For the message log, only the latest 200 entries are
displayed on the page.
Enable or disable the command configuration log
The switch can log changes that are made with CLI configuration commands.
To enable or disable the command configuration log:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual 709 Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual