NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 687)

• IPv6 DSCP Service: Specify the IP DiffServ Code Point (DSCP) field. This is an
optional configuration.
The DSCP is defined as the high-order six bits of the service type octet in the IPv6
header. Enter an integer from 0 to 63. To select the IPv6 DSCP, select one of the
DSCP keywords. To specify a numeric value, select Other and enter the numeric
value of the DSCP.
• Rate Limit Conform Data Rate: Specify the value of the conforming data rate,
which is the data rate at which confirming traffic is limited. The range is from 1 to
4294967295 Kbps.
• Rate Limit Burst Size: Specify the value of the burst size, which is the size at which
bursts of traffic above the confirming data rate are permitted. The range is from
1 to 128 Kbps.
• Time Range: From the Time Range menu, select the timer schedule that must
be associated with the rule. For more information about timer schedules, see
Timer schedules on page 144. If you did not set up any timer schedules, the menu
does not present any options.
9. Click the Apply button.
Your settings are saved.
The Rule Status field in the table shows if the rule is active or inactive. Blank means
that no timer schedule is associated with the rule.
10. To save the settings to the running configuration, click the Save icon.
Modify the match criteria for an IPv6 ACL rule To modify the match criteria
for an IPv6 ACL rule:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 Rules.
The IPv6 Rules page displays.
Main User Manual 687 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual