NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 741)

9. In the Server Address field, enter the IP address of the server in accordance with
the format indicated by the server address type.
The default is the IPv4 address 0.0.0.0.
10. In the Remote File Path field, specify the path on the server where you want to save
the file.
The path name can include alphabetic, numeric, forward slash, dot, or underscore
characters only. You can enter up to 160 characters.
11. In the Remote File Name field, specify a destination file name for the file to be
exported.
You can enter up to 32 characters.
12. If you select Script File from the File Type menu, specify the name of the script file
in the Local File Name field.
13. If you select SFTP, SCP, or FTP from Transfer Mode menu, specify the following
settings:
• User Name: Specify the user name for remote login to the server.
• Password: Specify the password for remote login to the server.
14. Click the Apply button.
The file is exported (uploaded) to the server. The page displays information about
the progress of the file transfer.
Use HTTP to export a file from the switch to a computer
You can upload (export) files of various types from the switch to a computer through
an HTTP session on your web browser.
To use HTTP to export a file from the switch to a computer:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual 741 Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual